A06B-6111-H055
Fanuc A06B-6111-H055 ai spindle amplifier module. This GE Fanuc ALPHA i series model aiSP-55 uses the Type A interface too the CNC and uses less spindle sensor feedback from the machine tool. This spindle is the largest amplifier from the 200VAC series. Originally released with two different software’s namely #H550 and #H553; later followed by #H570. Fitted on large CNC machine tools.
The drive is built on a 300mm wide aluminium heatsink with metal yellow casework; all the smaller 150mm, 90mm and 60mm spindle modules have yellow plastic casework. The drive is built on IGBT transistors; with A20B-1008-0091 power board and A20B-2100-080x or in later models A20B-2101-035x. No boards are available seperate from the complete spindle module.
When in stock at DNC we offer the A06B-6111-H055 on a service exchange basis. If not in stock then we offer same day testing and 24 hour repair tunraorund on these SPM-55i spindle amplifier modules. Further we offer fault finding services if you are unsure if the spindle amp is the problem. By all means consult our aiSP spindle module alarm page for further explantions of the digits on your spindle LED display. If you wish to order this amp, please let us know your software version.
If you require any information on our services, prices or stock; please don’t hesitate to contact us via phone or email.