A06B-6096-H203
Fanuc A06B-6096-H203 servo amplifier module. Part of the first series to communicate FSSB interface between the servo and CNC control system. This particular drive is SVM2-20/20 F/O and manufactured in tandem with the release of the 16/18/21i model A control systems from 1997 onwards.
This particular amp normally drives Fanuc Model aC3/2000 or aC6/2000 ALPHA servo motors on either channel. This drive in combination with it’s CNC control system and motors can alarm in many ways. As a result the drive being the actuator can be the culprit in many a case.
At DNC the following services are available for A06B-6096-H203 amplifiers. From service exchange program offered close to 25 years which we supply you a fully refurbished, tested module (repaired, tested by ourselves) with warranty. Swapped for your faulty, complete and non interfered with identical servo drive.
Our repair facilities which allow for a cheaper than exchange option; with 24 hour repair turnaround as standard for customers not so urgent. Or our testing and fault diagnosis service in which customers are not sure if their drive is indeed faulty. With custom built in-house designed test rigs resulting in us verifying many alarms on servo amplifier modules. Lastly if stock permits outright sale of this servo module maybe possible.
Wanting to find out how DNC can be of service for your A06B-6096-H203; call, email or use our contact forms for information about amplifier alarms, services, prices and availability.