A06B-0031-B077#7008

Fanuc A06B-0031-B077#7008 servo motor. BETA series model B1/3000 motor has following electrical stats 0.3kW, 144V at 200Hz with max RPM of 3000. Physically this motor has a straight keyed shaft with standard rotor seals and a BETA i8k encoder being a non seperable part of the motor. As part of the first generation of BETA series amplifiers and units were normally fitted on small machine tools or as auxillery bolt sections of the machine such as rotary tables, etc.

These motors are popular and our stocks here at DNC flutuate throughout the year. We always try to keep stock of this motor. Our services for the A06B-0031-B077#7008 are expansive. We offer the following services clean, strip down and inspection, we can fully test and measure the windings as well the encoder on an encoder tester. Assuming the motor isn’t on bench testing then we will run it on our closed loop Fanuc test rig. We offer exchange, surplus (stock permitting), and testing.

If your motor has a snapped shaft or burnt out windings then we cannot offer repair or exchange only replacement motors. Unsure whether your motor is faulty or the accompanying drive. Check out our BETA servo amplifier alarms and ALPHA servo drive alarms dependent on what drive you have powering the A06B-0031-B077#7008

Warranty is 12 months on all BETA servo motors supplied or repaired by DNC.