A02B-0228-B501
Fanuc A02B-0228-B501 control. This GE Fanuc series 18-MC system is a complete CNC control system. Two slots available usually for PSU and MAIN CPU with I/O running over HSSB or I/O link protocols. This system supports 4 axis control and is normally fitted on machining centre’s.
We do not supply complete controls ! The simple reason is the part number A02B-0228-B501 control could have hundreds of optional hardware inside; specified by each and every machine tool manufacturer when building their machine. Hence the term no two are the same (sure if identical machine tools then yes; the same); otherwise different. No doubt Fanuc has its own default minimum spec it sells for lower end solutions that require more capability than possible on the FS-18C controls; but you need to speak to the OEM for that information. If you require the complete control maybe look at retrofit options with your local CNC service engineer.
At DNC we do carry thousands of 18 series main boards and SMD plug in cards, modules so we can fault find your faulty control to find the problem pcb(s). Such as replacing the CPU main board, various memory FROM, SRAM, GRAPHICS, AXS, SPINDLE smd’s and then testing to make sure its good. DNC also supply Fanuc fans for cooling this system and batteries for backing it up.
If you do require repair of your A02B-0228-B501; please contact so we can discuss the fault codes, alarms, and the repair options, prices and availability.